CADDX NX-6 Instalační manuál stáhnout pdf (Strana 13)

GE Security

Zone activity monitor

This feature will send a report to the central station when a particular zone does not

change conditions within the specified number of hours/days programmed (see location

37, location 40 and locations 110-169).

Zone bypassed sounder alert

With this feature enabled, if a zone is bypassed, the NX-6 will beep the keypad sounder

when the zone is armed (see location 23 segment 2).

Zone Doubling

This feature allows you to use the six zones on the panel as twelve normally closed

zones. When this feature is used, European double E.O.L. configuration cannot be used.

THIS FEATURE DOES NOT INCREASE THE TOTAL NUMBER OF AVAILABLE ZONES

BEYOND 16. Zones 7-12 should not be programmed as a fire zone type when Zone

Doubling is used. If one of the twelve zones must be a fire zone, it must be one of Zones

1 to 6. The corresponding upper zone will become unavailable. For example: if Zone 6 is

a fire zone, then Zone 12 will not be available. (See location 37, segment 5).

NX-6-EUR Installation manual Page 13 23/12/04

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 103 104

Žádné komentáře

CADDX NX-6 Instalační manuál Strana 13