CADDX 8600 Instalační manuál

RANGER 8600DOWNLOADABLE CONTROL COMMUNICATORINSTALLATION MANUAL TABLE OF CONTENTSGENERAL DESCRIPTION ...

10LOCATIONS 000-003: PROGRAMMING THE MASTER ARM/DISARM CODELocations 000-003 contain master arm/disarm code (user number 1). Location 000 contains th

11LOCATIONS 078-083: PROGRAMMING THE ZONE TYPESLocations 078 through 083 contain a number identifying the characteristics of each of the 8 zones. Loca

12LOCATION 090-091: PROGRAMMING FOR AUXILIARY 2, [4] & [6] DOUBLE KEYPRESS The Ranger 8600 has the ability to report an Auxiliary 2 code and activ

13LOCATION 103: PROGRAMMING TO REPORT OPENINGS The Ranger 8600 has the ability to report an opening code each time the control is disarmed. The de

14LOCATION 122-123: PROGRAMMING TO REPORT LOW BATTERYThe Ranger 8600 has the ability to report a low battery code when AC power has been lost and the

15LOCATION 130: ENABLING THE SWINGER SHUTDOWNLocation 130 is used to enable the burglary zone swinger shutdown. The number programmed in this location

16LOCATION 137: IMMEDIATE RESTORE BY ZONEIf a "1" is programmed in location 137, restoral signals will follow the restore condition and repo

17LOCATION 145-148: PROGRAMMING THE AUXILIARY OUTPUTSFour of the functions in the following table are available on the 4-pin connector on the PC board

18LOCATION 151: PROGRAMMING THE NUMBER OF RINGS TO ANSWER DOWNLOAD CALLLocation 151 contains the number of rings the 8600 must detect before answering

19LOCATION 160: PROGRAMMING THE CLOCK, CURRENT MINUTES - TENS DIGIT Location 160 contains the current minutes - tens digit. The time is entered in 24

2RANGER 8600INSTALLATION MANUALGeneral DescriptionThe Caddx Ranger 8600 is a versatile 6 zone up/downloadable security control with a built-in digital

20LOCATION 168-171: PROGRAMMING THE SEED CODE FOR ROTATING MAINTENANCE CODES Locations 168-171 contain the complex, or "seed code" required

21LOCATION 175: PROGRAMMING ZONES 1, AND/OR 2 FOR NORMALLY CLOSED OPERATION ONLY Location 175 is used to program zones 1 and/or 2 for normally closed

22LOCATION 177: SPLIT REPORTING - PROGRAMMING AC POWER FAIL, LOW BATTERY, OPEN/CLOSE, AND MAINTENANCE OPEN/CLOSE TO REPORT TO TH

23THE FOLLOWING LOCATIONS ARE ACCESSIBLE ONLY THROUGH DOWNLOADINGLOCATIONS 186-193: CONTROL PANEL ACCESS CODELocations 186-193 contain the eight digit

24ARM/DISARM CODES 1-7LOCATION PAGE DESCRIPTION DATA 1 DATA 2 DATA 3 DATA 4 DEFAULT000-003 10 USER #1 ARM / DISARM CODE "1-2-3-4"004-007 10

LOCATION PAGE DESCRIPTION ZONE ID EVENT/EXT CODE DEFAULT25103 12 OPENING COMMUNICATOR CODE MAN NUMBER "0" DISABLED104-105 13 ZONE 1 COMMUNIC

LOCATION PAGE DESCRIPTION DATA DEFAULT26156 18 PROGRAM CLOCK, CURRENT DAY OF MONTH - TENS DIGIT UNDEFINED157 18 PROGRAM CLOCK, CURRENT DAY OF MONTH -

27LOCAL TELEPHONE COMPANY INTERFACE INFORMATIONTELEPHONE CONNECTION REQUIREMENTSExcept for telephone company provided ringers, all connections to the

SPECIFICATIONSOPERATING POWER 16.5 VAC 25 VA TransformerAUXILIARY POWER 12 VDC 500mALOOP RESISTANCE 300 Ohms MaximumBUILT-IN SIREN DRIVER

3PARTS DIAGRAM

4TERMINAL DRAWING & SPECIAL NOTES

5TERMINAL DESCRIPTIONTERMINAL DESCRIPTION 1 Connect one side of zone 1 loop. The other side of loop to common terminal

6HOW TO PROGRAM THE 8600The Ranger 8600 can be placed into the "Program" mode by either of the following methods.1. Enter the 4 digit "

7

8PAGES 8 & 9 DESCRIBE ALL THE LOCATIONS WHICH MUST BE PROGRAMMED FOR THERANGER 8600 TO FUNCTION AND REPORT TO A CENTRAL STATION. OTHER OPTIONSMAY

9LOCATION 074: PROGRAMMING COMMUNICATOR FORMAT FOR THE SECONDARY TELEPHONE NUMBERLocation 074 contains the communicator format for the secondary phon